linux基礎之Shell Script
1 Shell Scipt
使用指令和基本程序設計結構寫成的程序，可以完成復雜的處理流程
1.1 程序書寫
復制代碼 代碼如下:
#!/bin/bash
# Program:
# This program shows "Hello Wrold" in your screen.
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
echo -e "Hello World!\a\n"
exit 0
第一行 #!/bin/bash 說明使用的shell類型,不同shell語法可能不同，所以要說明使用的是哪種shell
其它#開始的表示注釋,注釋一般需要說明
程序功能
版本歷史
作者及聯系方式
設置好PATH變量，以便直接可以調用相應路徑下的命令
程序主體部分
exit 0 表示程序執行成功，向環境返回0
1.2 程序執行
bash $bash sh01.sh #如果用sh sh01.sh而sh又不是指向bash，那么sh01.sh內的語法就會不一致，因?yàn)橛?#sh去解釋了bash語法寫的shell script,針對這個程序，如果 #$type sh #得到sh is hashed (/bin/sh) #那么會輸出-e Hello world!,而非Hello world!
復制代碼 代碼如下:
$./xxx.sh $chmod +x sh01.sh $./sh01.sh
source $ source sh01.sh
注：用bash和用source的不同在于，用bash執行時，shell script其實是在在父程序bash下新建了一個 bash子程序，這個子程序中執行，當程序執行完后，shell script里定義的變量都會隨子程序的結束而消失， 而用source執行時，是在父程序bash中執行,shell script里定義的變量都還在。
2 簡單Shell練習
2.1 例1 接收用戶輸入
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to read user's input
# Site: www.jb51.net
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
read -p "Your first name:" firstname # tell user to input
read -p "Your last name:" lastname # tell user to input
echo -e "\nYour full name: $firstname $lastname"
exit 0
調用：
復制代碼 代碼如下:
$ bash sh02.sh
Your first name:Minix
Your last name:007
Your full name: Minix 007
2.2 例2 按日期建立相似名字的文件
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to create files according to date
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
# Get filename from user
echo -e "I will use 'touch' to create three files."
read -p "Please input your filename:" tmpfilename
# Prevent the user input [Enter]
# Check whether filename exists or not
filename=${tmpfilename:-"filename"}
# Get the final filename according to date
date1=$(date --date='2 days ago' +%Y%m%d) # date of 2 days ago
date2=$(date --date='1 days ago' +%Y%m%d) # date of yesterday
date3=$(date +%Y%m%d) # date of today
filename1=${filename}${date1}
filename2=${filename}${date2}
filename3=${filename}${date3}
# Create file
touch "$filename1"
touch "$filename2"
touch "$filename3"
exit 0
調用：
復制代碼 代碼如下:
$ bash sh03.sh
I will use 'touch' to create three files.
Please input your filename:WhoKnows
$ ls W*
WhoKnows20130201 WhoKnows20130202 WhoKnows20130203
3 判斷式
3.1 測試文件是否存在
test -e filename會根據filename是否存在返回0或1,再交由echo顯示結果：
復制代碼 代碼如下:
$ test -e sh01.sh echo "Exists" || echo "Not exists"
Exists
$ test -e sh0x.sh echo "Exists" || echo "Not exists"
Not exists
3.2 test常用選項
3.2.1 文件類型
復制代碼 代碼如下:
-e file :file是否存在
-f file :file是否存在且為文件
-d file :file是否存在且為目錄
3.2.2 權限
-r file :file是否有讀的權限
3.2.3 文件新舊比較
-nt file1 file2 : file1 是否比 file2新
3.2.4 整數，字符串，多重條件判斷
-z string: string是否為空
例：輸出指定文件類型及屬性
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to output type and permission of the target file
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
# Get filename from user
echo -e "Input name of the file that you want to check.\n"
read -p "Filename:" filename
test -z $filename echo "You must input a filename." exit 0
# Check whether the file exists or not
test ! -e $filename echo "The file '$filename' DO NOT exists" exit 0
# Check type and permission of the file
test -f $filename filetype="regular file"
test -d $filename filetype="directory"
test -r $filename perm="readable"
test -w $filename perm="$perm writable"
test -x $filename perm="$perm executable"
# Output result
echo "The filename:$filename is a $filetype"
echo "And Permissions are :$perm"
exit 0
調用：
復制代碼 代碼如下:
$ bash sh04.sh
Input name of the file that you want to check.
Filename:sh01.sh
The filename:sh01.sh is a regular file
And Permissions are :readable writable executable
3.3 使用[]判斷
測試文件是否存在
復制代碼 代碼如下:
$ [ -e "sh01.sh" ] ; echo $?
0
$ [ -e "sh0x.sh" ] ; echo $?
1
注意[]內空格必須有
這種方法和test的test -e "sho1.sh" ; echo $? 是一致的
4 Shell Script 參數
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to ouput parameter of the shell script
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
echo "The script's name is ==> $0"
echo "Total parameter number is ==> $#"
# Check whether number of the parameter is less than 2
[ "$#" -lt 2 ] echo "The number of parameter is less than 2.Stop here." exit 0
echo "The whole parameter is ==> '$@'"
echo "The first parameter is ==> $1"
echo "The first parameter is ==> $2"
exit 0
調用：
復制代碼 代碼如下:
$ bash sh05.sh 1a 2b 3c 4d
The script's name is ==> sh05.sh
Total parameter number is ==> 4
The whole parameter is ==> '1a 2b 3c 4d'
The first parameter is ==> 1a
The first parameter is ==> 2b
注：從以上程序可以看出與參數有關的預設變量如何表示
5 條件表達式
5.1 if 結構
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to show if else expression
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
read -p "Please input [Y/N]" choice
if [ "$choice" == "Y" ] || [ "$choice" == "y" ];then
echo "OK, continue"
exit 0
fi
if [ "$choice" == "N" ] || [ "$choice" == "n" ];then
echo "Oh, interupt"
exit 0
fi
exit 0
調用：
復制代碼 代碼如下:
$ bash sh06.sh
Please input [Y/N]y
OK, continue
$ bash sh06.sh
Please input [Y/N]n
Oh, interupt
5.2 if else 結構
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to show if else expression
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
read -p "Please input [Y/N]" choice
if [ "$choice" == "Y" ] || [ "$choice" == "y" ];then
echo "OK, continue"
exit 0
elif [ "$choice" == "N" ] || [ "$choice" == "n" ];then
echo "Oh, interupt"
exit 0
else
echo "Input [Y/N]"
fi
exit 0
5.3 case
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to show case expression
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
read -p "Tell me your choice:[1-3]=>" choice
case $choice in
"1")
echo "Your choice is ONE"
"2")
echo "Your choice is TWO"
"3")
echo "Your choice is THREE"
esac
exit 0
調用：
復制代碼 代碼如下:
$ bash sh08.sh
Tell me your choice:[1-3]=>2
Your choice is TWO
$ bash sh08.sh
Tell me your choice:[1-3]=>1
Your choice is ONE
$ bash sh08.sh
Tell me your choice:[1-3]=>3
Your choice is THREE
6 函數
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to test function
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
function myprint(){
echo -n "Your choice is "
}
read -p "Tell me your choice:[1-3]=>" choice
case $choice in
"1")
myprint;echo "ONE"
"2")
myprint;echo "TWO"
"3")
myprint;echo "THREE"
esac
exit 0
調用：
復制代碼 代碼如下:
$ bash sh09.sh
Tell me your choice:[1-3]=>1
Your choice is ONE
$ bash sh09.sh
Tell me your choice:[1-3]=>2
Your choice is TWO
$ bash sh09.sh
Tell me your choice:[1-3]=>3
Your choice is THREE
7 循環
7.1 while
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program shows while expression
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
while [ "$choice" != "yes" ]
do
read -p "Give your choice [yes/no]:" choice
done
exit 0
調用：
復制代碼 代碼如下:
$ bash sh10.sh
Give your choice [yes/no]:no
Give your choice [yes/no]:no
Give your choice [yes/no]:nx
Give your choice [yes/no]:yes
7.2 for
復制代碼 代碼如下:
# !/bin/bash
# Program:
# This program is used to demo for expression
# History:
# 2013/2/3 on_1y First release
PATH=$PATH
export PATH
for choice in 1 2 3
do
echo "your choice is $choice"
done
exit 0
調用示例：
復制代碼 代碼如下:
$ bash sh11.sh
your choice is 1
your choice is 2
your choice is 3
8 shell script的追蹤與Debug
sh -n xx.sh # 語法檢查
sh -x xx.sh # 列出xx.sh的執行過程
您可能感興趣的文章:- Linux基礎知識99問(五)
- Linux基礎知識99問(四)
- Linux基礎知識99問（二）
- Linux基礎知識99問（一）
- Linux下PHP+MYSQL+APACHE配置過程 (摘)
- linux下安裝apache與php;Apache+PHP+MySQL配置攻略
- linux php mysql數據庫備份實現代碼
- linux下apache、mysql、php安裝配置詳細筆記
- linux安裝全中文管理面板教程(php+mysql)
- hi 感恩節——Linux基礎教程之mysql和php
